“I would highly recommend Floor Monkeys!”
Sanded & refinished Douglas Fir floors from 1958 & gave them new life! Fast, efficient, skilled & professional! I would highly recommend Floor Monkeys! 🐒🐒🐒

Engineered Hardwood Services
Engineered hardwood installation for slab and raised-foundation homes across Sacramento and the Bay Area, glued, floated or nailed to suit your subfloor.
Types of Engineered Hardwood
Boards bonded straight to a flattened concrete slab. It feels solid underfoot and sounds like a nailed floor, which suits most Valley tract homes.
Boards locked to each other over an underlayment, not fastened to the floor. A good fit for condos and some slabs where glue is not an option.
Engineered boards nailed or stapled to a plywood subfloor, the same way as solid wood, for raised foundations and second stories.
Wide white oak boards with a stable layered core, so you get the wide-plank look with less seasonal movement than solid boards.
Matching stair nosing, reducers and thresholds so the engineered floor flows into stairs, doorways and other rooms cleanly.
Ready for floors you'll show off?
Free in-home estimate. Written quote. No pressure.
Why Floor Monkeys

| What you get | Floor Monkeys | Typical installers |
|---|---|---|
| License number shown and checkable | ||
| Crew shows up when we say | ||
| Job site cleaned every day | ||
| Moisture test before every wood install | ||
| We move your furniture and move it back | ||
| 1-year workmanship warranty in writing | ||
| Owner personally checks every job |
Why Floor Monkeys
“The work beneath your floor matters just as much as the surface you see.”
The Step You Never See
Step 5 of 5
The top finish protects the wood and gives it a soft, low-glare sheen.
Most homes built in the Valley since the 1990s sit on a concrete slab. A slab looks flat, but run a long straightedge across it and you will often find humps and dips. Engineered boards are stiff. Over a dip they bridge the gap and flex when you step on them. Over a hump they rock. Either way you get hollow spots, clicking and loose glue.
So before any wood goes down, we map the slab with a straightedge and mark the high and low spots. High spots get ground down. Low spots get filled with a patch or a self-leveling compound and allowed to cure. Then the slab is vacuumed clean and checked for moisture, because concrete holds water long after it is poured.
So before any wood goes down, we map the slab with a straightedge and mark the high and low spots. High spots get ground down. Low spots get filled with a patch or a self-leveling compound and allowed to cure. Then the slab is vacuumed clean and checked for moisture, because concrete holds water long after it is poured.
This takes a day or more on many jobs and nobody sees it when the floor is done. You will feel it every time you walk across a floor that sounds solid.
Concrete slab. The base. Slabs can hold moisture, so we test before we start.
Moisture check. A check, not a layer. We read the slab before planks go down.
Moisture barrier. A sheet over the slab, with the seams taped closed.
Engineered planks. An oak wear layer over a layered core, seen on the cut edge.
Satin finish. A sheen on the wood, not a separate layer.
Engineered Hardwood Process
We visit, measure and check your subfloor and current floors.
You get the scope, materials and schedule in writing.
We lock your dates and order your flooring.
We protect your home and get the subfloor flat and ready.
The crew installs or refinishes and cleans up every day.
We walk the floor with you and fix anything you spot.
Engineered Hardwood Cost
Engineered Hardwood Questions
Yes. The top layer is real hardwood over a layered wood core. You see and walk on real wood, and the core helps it hold its shape over concrete and through seasonal changes.
Yes. That is one of its main uses. We flatten the slab, check it for moisture and either glue the boards down or float them over the right underlayment.
It depends on the wear layer. Thicker wear layers can be sanded and refinished, some more than once. Thin wear layers can usually only be screened and recoated.
Glue-down feels and sounds more solid and suits most slabs. Floating goes in faster and works where glue is not allowed or the slab cannot take it. We recommend one after seeing your floor.
Yes, with care around the sink and dishwasher. Wipe up spills fast and use mats at the sink. We plan the layout around cabinets and appliances at your estimate.
Service Areas
Sanded & refinished Douglas Fir floors from 1958 & gave them new life! Fast, efficient, skilled & professional! I would highly recommend Floor Monkeys! 🐒🐒🐒
⭐⭐⭐⭐⭐ I cannot recommend Kirill and crew from Floor Monkeys highly enough! From start to finish, they were professional, efficient, and truly cared about doing the job right. When the flooring supplier sold me the wrong product, the crew immediately went to pick up the correct materials without hesitation. They moved all of my furniture, leveled the subfloor, installed beautiful new flooring in both of my bedrooms, and then carefully put everything back exactly where it belonged. Their attention to detail, work ethic, and commitment to customer satisfaction were outstanding. It’s rare to find a company that is this ethical, dependable, and professional. The quality of their work exceeded my expectations, and I couldn’t be happier with the results. If you’re looking for a flooring company you can trust, I wholeheartedly recommend Four Monkeys. They earned every one of these five stars!
Kirill, owner of Floor Monkeys, went well-above anything I expected. We met several times, he tested our hardwood floor, made recommendations on how our once beautiful (and not so old) flooring could be brought back to life. The results were amazing! I was so impressed with the time, care, trust, and level of professionalism I experienced from beginning to end. I would recommend Floor Monkeys to anyone who is in need of the best in the industry...

Ready for floors you'll show off?
Free in-home estimate. Written quote. No pressure.
Engineered wood floors have a real hardwood top layer bonded to a core of cross-layered wood. The layers fight each other's movement, so the board stays flatter and steadier than solid wood when the air gets hot, dry or damp.
From a few feet away, a good engineered floor looks the same as solid hardwood. The difference is under the top layer. That steady core is why engineered boards can go places solid boards should not, like over concrete, over radiant heat and in basements or slab homes.
From a few feet away, a good engineered floor looks the same as solid hardwood. The difference is under the top layer. That steady core is why engineered boards can go places solid boards should not, like over concrete, over radiant heat and in basements or slab homes.
Engineered boards come prefinished in most cases, with the stain and topcoat applied and cured at the factory. That means less dust in your home, no finish fumes and a faster job. You can still pick from many stain colors, sheens and textures, from smooth to wire-brushed.
Engineered hardwood over concrete is the most common install we do in newer Sacramento homes. The keys are a flat slab, a moisture check and the right install method, either glue-down or floating over a moisture-blocking underlayment.
Concrete is never perfectly dry. It keeps giving off water vapor, and that vapor rises into whatever sits on top of it. For glue-down jobs we use adhesive rated for the slab's moisture levels. For floating jobs the underlayment carries its own vapor barrier.
Concrete is never perfectly dry. It keeps giving off water vapor, and that vapor rises into whatever sits on top of it. For glue-down jobs we use adhesive rated for the slab's moisture levels. For floating jobs the underlayment carries its own vapor barrier.
A slab also needs to be clean. Old carpet tack strips, paint, drywall mud and leftover glue all keep new adhesive from bonding. We scrape and clean the slab during prep so the new floor grips the concrete, not the dirt sitting on it.

Wide plank engineered oak is one of the most requested floors we install. You get the calm, open look of seven-inch-plus white oak boards, with a layered core that moves less than a solid board of the same width.
Wide boards show every flaw in the subfloor, so slab prep matters even more on these jobs. A dip that a narrow board would hide can show up as a hollow spot under a wide plank. That is why we spend the extra time grinding and filling before the first row.
Wide boards show every flaw in the subfloor, so slab prep matters even more on these jobs. A dip that a narrow board would hide can show up as a hollow spot under a wide plank. That is why we spend the extra time grinding and filling before the first row.
White oak takes stain well, so you can go natural, light, smoked or dark. We can bring samples to your home so you can see them in your own light next to your cabinets and walls.
Engineered vs solid hardwood comes down to your subfloor and how long you plan to stay. Solid wood can be sanded more times. Engineered wood is more stable and works over concrete. Both are real wood and both look great when installed well.
On a raised foundation with a sound plywood subfloor, solid wood is a strong choice. On a slab, engineered is the safer pick. In two-story homes, many owners use solid upstairs and engineered downstairs in the same species and color so the floors match.
On a raised foundation with a sound plywood subfloor, solid wood is a strong choice. On a slab, engineered is the safer pick. In two-story homes, many owners use solid upstairs and engineered downstairs in the same species and color so the floors match.
Ask about wear-layer thickness when you compare engineered boards, and ask what the core is made of. It decides how many times the floor can be sanded down the road. We will show you the difference on real samples at your estimate.
Engineered wood floors have a real hardwood top layer bonded to a core of cross-layered wood.
Floating vs glue-down engineered hardwood is a choice between speed and feel. Floating floors go in faster and can be removed later. Glue-down floors feel more solid and sound less hollow, which is why we use them on most slab homes.
A floating floor rests on an underlayment and is held together by its own joints. It needs room to move at the walls, and it needs a flat slab even more than glue-down does, or it will bounce in the low spots.
A floating floor rests on an underlayment and is held together by its own joints. It needs room to move at the walls, and it needs a flat slab even more than glue-down does, or it will bounce in the low spots.
A glue-down floor is bonded across its whole surface. It needs a clean, flat, dry slab and the right adhesive and trowel. Done right, it feels like a nailed solid floor. Some condos limit which methods you can use, so check your HOA rules before you choose.
Engineered hardwood cost depends on the board you choose, the install method and how much slab prep your home needs. We measure, check the slab and give you a written quote before any work starts, so the prep is in the price.
Board price rises with wear-layer thickness, species and width. Glue-down labor includes adhesive and more prep time than floating. Grinding and leveling a slab can add a day or more on homes with uneven concrete.
Board price rises with wear-layer thickness, species and width. Glue-down labor includes adhesive and more prep time than floating. Grinding and leveling a slab can add a day or more on homes with uneven concrete.
Old floor removal, stairs, nosing, baseboards and moving furniture all add to the scope. We list each one in the quote so you can see where the money goes and make choices with clear numbers.
Living with engineered hardwood is much like living with solid wood. Use felt pads under furniture, mats at outside doors, a soft vacuum head and a cleaner made for finished wood floors. Keep standing water and steam mops away from the seams.
Because the core is steady, engineered floors handle the swing from hot Valley summers to damp winters with fewer gaps than solid boards. Running your air in summer and keeping indoor humidity fairly steady helps any wood floor stay in good condition.
Because the core is steady, engineered floors handle the swing from hot Valley summers to damp winters with fewer gaps than solid boards. Running your air in summer and keeping indoor humidity fairly steady helps any wood floor stay in good condition.
When the finish wears, a screen and recoat can freshen it. Boards with a thick wear layer can be fully sanded later on, which gives a well-chosen engineered floor a long life in your home.
Engineered hardwood installation on a slab starts with the product instructions, moisture readings and a plan for connections to other rooms. The wear layer and approved fastening method matter as much as the color when comparing boards for a particular home.
When comparing engineered wood floors, keep the sample label and installation instructions together. A similar color does not mean two boards have the same wear layer or approved fastening method. Ask how the floor will meet sliding doors, kitchen appliances and stairs. These details help you compare complete scopes rather than a board alone, and they keep the choice tied to the slab and rooms you actually have.
When comparing engineered wood floors, keep the sample label and installation instructions together. A similar color does not mean two boards have the same wear layer or approved fastening method. Ask how the floor will meet sliding doors, kitchen appliances and stairs. These details help you compare complete scopes rather than a board alone, and they keep the choice tied to the slab and rooms you actually have.
More Wood Services

Solid oak, white oak and wide-plank floors installed over a checked, flat subfloor. We acclimate the wood first so it stays tight through Valley summers.
Hardwood Installation
We sand worn floors down to fresh wood, then stain and finish them in the color you pick. It is often the way to save original oak found under old carpet.
Floor Refinishing
We turn carpeted stairs into wood, replace worn treads and refinish old ones. The nosing is matched to your floor so the stairs look built in.
Stairs
Damaged boards, squeaks and gaps fixed without tearing out the whole floor. We weave in new boards and blend the finish so the repair disappears.
Floor Repair