Skip to content
Spiral staircase viewed from above with oak treads and a black railing

Stairs Services

Hardwood Stair Installation & Refinishing in Sacramento & the Bay Area

Hardwood stair installation and refinishing for homes across Sacramento and the Bay Area, from carpet-to-wood conversions to new treads and matching nosing.

Types of Stairs

Stairs Options

  • Carpet-to-Hardwood Conversion

    We pull the carpet and pad, remove the old tack and staples, then cap each step with new hardwood treads and risers.

  • New Treads and Risers

    Solid hardwood treads cut to fit each step, with painted or wood risers, for a staircase that looks and feels built-in.

  • Nosing Matched to Floors

    Stair nosing and landing trim matched to the floor at the top and bottom, so the stairs and floors read as one.

  • Stair Refinishing

    Worn wood treads sanded by hand and finished in the same color as your floors, or a new color if you are changing both.

  • LVP Stairs

    Luxury vinyl plank stairs with matching stair nose pieces, for homes with LVP floors that want the stairs to match.

Ready for floors you'll show off?

Free in-home estimate. Written quote. No pressure.

Why Floor Monkeys

What Sets Us Apart

Plain promises you can check. If it's on this list, it's how every Floor Monkeys job runs.
Living room with a white fireplace and light oak hardwood flooring
Floor Monkeys vs. typical installers
What you getFloor MonkeysTypical installers
License number shown and checkable
Crew shows up when we say
Job site cleaned every day
Moisture test before every wood install
We move your furniture and move it back
1-year workmanship warranty in writing
Owner personally checks every job
  • 16+ Years Installing Floors
  • CA License #1090151
  • 1-Year Workmanship Warranty

How We Do It

Staircase tread work
Stair treads in progress
Stair preparation overhead
Preparing exposed stair surfaces
Stair treads unfinished railing
Oak treads beside unfinished railings

Stair Gallery

  • Curved iron staircase

  • Spiral staircase

  • Oak treads, black railing

  • White risers, oak treads

  • Dark treads, white balusters

  • Dark treads, iron balusters

  • Oak treads, white risers

  • Exposed stair treads

See all stair photos →

Why Floor Monkeys

Why Homeowners Choose Floor Monkeys for Stairs

“The work beneath your floor matters just as much as the surface you see.”

Kirill, Founder
  • Every stair tread is measured and cut to its own step, since no two steps are the same
  • Stair nosing is matched to your floors, so the staircase looks like it came with the house
  • Quiet stairs: we fix squeaks and loose stair parts before the new treads go on
  • Stair refinishing done by hand on every tread, corner and baluster edge
  • Dust control and daily cleanup while your stairs are being worked on
  • A written stair quote with a plan for getting up and down during the job

The Step You Never See

Matching Stair Nosing to the Floor So It Looks Built-In

Step 4 of 4

Clear coats protect the treads from the heaviest foot traffic in the house.

Why this step matters

Stairs are where flooring jobs most often look unfinished. The floor at the top is one height and color, the landing is another, and the stair nose sticks out at a different depth than the treads below. Your eye catches it every time you walk past.

Getting it right starts before any wood is cut. We measure the finished height of the new floor at the top and bottom, then pick a nose profile and thickness that lands flush with it. On a carpet conversion, the old treads are often cut back so the new ones sit at a comfortable depth. Each tread is scribed to the wall and stringer so there are no gaps at the sides. Landings get the same nose so every edge matches.

Read more

Getting it right starts before any wood is cut. We measure the finished height of the new floor at the top and bottom, then pick a nose profile and thickness that lands flush with it. On a carpet conversion, the old treads are often cut back so the new ones sit at a comfortable depth. Each tread is scribed to the wall and stringer so there are no gaps at the sides. Landings get the same nose so every edge matches.

When the floor and stairs are finished together, we stain and seal them in one color from the same batch. The result looks built in, not added on.

Stairs preparation details
  1. Stair framing. The structure that carries each step.

  2. Risers go on. The upright board between treads.

  3. Oak treads with nosing. New oak treads with a rounded front edge.

  4. Finish sheen. A sheen on the wood, not a separate layer.

Stairs Process

Our Stairs Process

Six clear steps from the first visit to the final walkthrough.
  1. Step 1

    Free in-home estimate

    We visit, measure and check your subfloor and current floors.

  2. Step 2

    Written quote

    You get the scope, materials and schedule in writing.

  3. Step 3

    Schedule and order materials

    We lock your dates and order your flooring.

  4. Step 4

    Prep and protect

    We protect your home and get the subfloor flat and ready.

  5. Step 5

    Install or refinish

    The crew installs or refinishes and cleans up every day.

  6. Step 6

    Final walkthrough

    We walk the floor with you and fix anything you spot.

Stairs Cost

What Affects Stairs Cost in Sacramento?

Every home is different under the floor, so we price each job after an in-home visit. These are the things that move the number.
  • Number of steps and landings
  • Open or closed stringers, and curved or straight stairs
  • New treads, caps over old treads, or refinishing existing wood
  • Wood species and riser finish (wood or painted)
  • Carpet removal and staple pulling
  • Railing and baluster work around the treads
  • Matching nosing to new or existing floors

Stairs Questions

FAQ

Straight answers to what homeowners ask us most.

Can you replace carpet on stairs with hardwood?

Yes. We remove the carpet and pad, cut back the old nose when needed, and install new hardwood treads and risers. It is one of our most common stair jobs.

Can stairs match my new floors?

Yes. We use the same species and stain, and pick nosing that matches the floor height at the top and bottom, so the stairs and floors read as one.

Can I use my stairs during the job?

Usually yes, with care. We often work in stages so you can still get upstairs. During finish coats, we plan a dry path or a short window when the stairs are off-limits.

Can you put LVP on stairs?

Yes. LVP stairs use matching stair nose pieces glued and fastened to each step. It is a good fit when the floors in your home are LVP.

Can you refinish my stairs without replacing them?

If the treads are solid wood with enough thickness left, yes. We sand each tread by hand and finish it to match. Painted or damaged treads may need new caps.

Service Areas

Where We Offer Stair Installation & Refinishing

Stair Installation & Refinishing across 14 Northern California counties. Find your county and city.
Stair Installation & Refinishing in Top Cities · 0 cities
    Greater Sacramento · 42 cities
    Bay Area · 68 cities

    What Homeowners Are Saying

    “I would highly recommend Floor Monkeys!”

    Sanded & refinished Douglas Fir floors from 1958 & gave them new life! Fast, efficient, skilled & professional! I would highly recommend Floor Monkeys! 🐒🐒🐒

    Read moreRead less

    “I cannot recommend Kirill and crew from Floor Monkeys highly enough!”

    ⭐⭐⭐⭐⭐ I cannot recommend Kirill and crew from Floor Monkeys highly enough! From start to finish, they were professional, efficient, and truly cared about doing the job right. When the flooring supplier sold me the wrong product, the crew immediately went to pick up the correct materials without hesitation. They moved all of my furniture, leveled the subfloor, installed beautiful new flooring in both of my bedrooms, and then carefully put everything back exactly where it belonged. Their attention to detail, work ethic, and commitment to customer satisfaction were outstanding. It’s rare to find a company that is this ethical, dependable, and professional. The quality of their work exceeded my expectations, and I couldn’t be happier with the results. If you’re looking for a flooring company you can trust, I wholeheartedly recommend Four Monkeys. They earned every one of these five stars!

    Read moreRead less

    “I would recommend Floor Monkeys to anyone who is in need of the best in the industry...”

    Kirill, owner of Floor Monkeys, went well-above anything I expected. We met several times, he tested our hardwood floor, made recommendations on how our once beautiful (and not so old) flooring could be brought back to life. The results were amazing! I was so impressed with the time, care, trust, and level of professionalism I experienced from beginning to end. I would recommend Floor Monkeys to anyone who is in need of the best in the industry...

    Read moreRead less
    Great room with a brick fireplace and refinished hardwood flooring

    Ready for floors you'll show off?

    Free in-home estimate. Written quote. No pressure.

    Carpet to Hardwood Stairs

    Carpet to hardwood stairs is the most common stair job we do. We remove the carpet and pad, pull every staple and tack strip, check the old treads, then install new hardwood treads and risers that match the floor around them.

    Under most stair carpet you will find rough treads that were never meant to show. Some homes have a decent oak tread with a rounded nose that can be cut back and capped. Others need full new treads. We check which one you have before we quote, so the price fits your stairs.

    Read more

    Under most stair carpet you will find rough treads that were never meant to show. Some homes have a decent oak tread with a rounded nose that can be cut back and capped. Others need full new treads. We check which one you have before we quote, so the price fits your stairs.

    The finished staircase changes how the whole entry looks. Many owners pair it with painted white risers, which gives a clean line on each step and hides scuffs from shoes better than stained risers.

    Stair Treads and Risers

    Stair treads are the part you step on and risers are the vertical faces between them. New treads are usually solid hardwood, cut to fit each step, glued and fastened down so they stay quiet. Risers can be wood to match or painted.

    No two steps in a house are exactly the same size, even when they look it. Each tread gets measured and scribed to the walls and stringers so the sides fit tight. That is slow work, and it is why stairs are priced by the step, not by the square foot.

    Read more

    No two steps in a house are exactly the same size, even when they look it. Each tread gets measured and scribed to the walls and stringers so the sides fit tight. That is slow work, and it is why stairs are priced by the step, not by the square foot.

    On open stairs with a visible stringer, the tread ends get a return so the end grain does not show. Those small details make a staircase look finished from every angle, whether you see it from the entry, the living room or the landing above.

    Stair Nosing That Matches

    Dark wood stair treads with iron balusters

    Stair nosing is the rounded front edge of each tread and the trim piece at the top of the stairs where the floor meets the first step. Matching its height, color and profile to your floors is what makes the stairs look built-in.

    If the nose sits too high or too low against the floor, it creates a lip you can feel with your foot and see from across the room. We measure finished floor height before ordering nosing so it lands flush.

    Read more

    If the nose sits too high or too low against the floor, it creates a lip you can feel with your foot and see from across the room. We measure finished floor height before ordering nosing so it lands flush.

    For LVP and laminate floors, we use matching stair nose pieces from the same product line. For hardwood, we can mill or order nosing in the same species and finish it along with the floor.

    Stair Refinishing for Wood Stairs

    Stair refinishing brings worn wood treads back without replacing them. Each tread is sanded by hand or with small sanders, the edges near the walls and balusters are scraped, then the treads are stained and sealed to match your floors.

    Stairs take more hand work than any floor. A drum sander cannot reach most of a tread, so the job is done with detail sanders, scrapers and patience. The goal is the same as a floor: sand flat, take out every mark, then finish.

    Read more

    Stairs take more hand work than any floor. A drum sander cannot reach most of a tread, so the job is done with detail sanders, scrapers and patience. The goal is the same as a floor: sand flat, take out every mark, then finish.

    If treads have been painted, stained very dark or worn too thin, refinishing may not be a suitable choice. We will tell you at the estimate whether caps or new treads make more sense.

    Carpet to hardwood stairs is the most common stair job we do.

    Planning a Staircase Remodel

    A staircase remodel can be as simple as new treads and paint, or as big as new treads, risers, railing and balusters. Plan the flooring and stair work together so the colors, heights and finishes line up at the top and bottom.

    If you plan to replace railings or balusters, do it in the same project. Treads often have to be notched around balusters, and it is much cleaner to install new ones once than to fit around old ones that will come out later.

    Read more

    If you plan to replace railings or balusters, do it in the same project. Treads often have to be notched around balusters, and it is much cleaner to install new ones once than to fit around old ones that will come out later.

    We focus on the flooring side of the stairs: treads, risers, nosing, landings and finish. That is where most of the visible change comes from. We will tell you plainly if a part of your remodel needs another trade.

    LVP Stairs and Stair Tread Replacement

    LVP stairs use the same vinyl plank as your floors, cut to fit each tread and riser, with a matching stair nose piece on the front edge. It is a good choice when your floors are LVP and you want the stairs to match.

    Each LVP stair piece is glued and fastened to the step so it does not flex or click. The stair nose takes the most wear, so we use solid pieces made for stairs, not floor trim stretched to fit.

    Read more

    Each LVP stair piece is glued and fastened to the step so it does not flex or click. The stair nose takes the most wear, so we use solid pieces made for stairs, not floor trim stretched to fit.

    Stair tread replacement makes sense when a tread is cracked, loose or badly worn, or when you are changing the whole look. We can replace one tread to match the rest, or redo the full staircase.

    Safety and Living With Your New Stairs

    Hardwood stairs are safe and easy to live with when the finish has the right grip and you add a runner if you have small kids, pets or older family members. Matte and satin finishes are less slick than gloss.

    A runner is a strip of carpet down the middle of the stairs with wood showing at the sides. It softens footsteps and adds grip, and it lets you keep the look of wood. Ask us about adding one when we quote your stairs, and bring photos of runners you like.

    Read more

    A runner is a strip of carpet down the middle of the stairs with wood showing at the sides. It softens footsteps and adds grip, and it lets you keep the look of wood. Ask us about adding one when we quote your stairs, and bring photos of runners you like.

    Keep stair treads clean with a dry mop or soft vacuum. Grit on stairs acts like sandpaper on the finish, so a quick sweep each week keeps them looking good for years.

    Planning Hardwood Stair Installation at Landings

    Hardwood stair installation at landings requires matching height, edge shape and tread condition, not only matching color. Checking the landing, nosing and rail connections together helps distinguish refinishing existing wood from a conversion that changes the stair assembly.

    Look at the landing and the floor at the foot of the staircase together. A matching color alone does not guarantee a matching height or edge shape. Discuss the existing tread condition, the rail connections and the nosing profile during the visit. Keeping those details in the written scope helps distinguish a surface refinish from a conversion that changes the stair assembly.

    Read more

    Look at the landing and the floor at the foot of the staircase together. A matching color alone does not guarantee a matching height or edge shape. Discuss the existing tread condition, the rail connections and the nosing profile during the visit. Keeping those details in the written scope helps distinguish a surface refinish from a conversion that changes the stair assembly.

    More Wood Services

    • Kitchen island surrounded by wide-plank hardwood flooring

      Hardwood Floor Installation

      Solid oak, white oak and wide-plank floors installed over a checked, flat subfloor. We acclimate the wood first so it stays tight through Valley summers.

      Hardwood Installation
    • Living room with light hardwood planks and a contrasting wood border

      Engineered Hardwood Installation

      Real wood on a stable core, made for the slab foundations under most newer Sacramento homes. Glued, floated or nailed, depending on what your floor needs.

      Engineered Hardwood
    • Living room with a fireplace and refinished oak flooring

      Hardwood Floor Refinishing

      We sand worn floors down to fresh wood, then stain and finish them in the color you pick. It is often the way to save original oak found under old carpet.

      Floor Refinishing
    • Hardwood board weave-in repair in progress

      Hardwood Floor Repair

      Damaged boards, squeaks and gaps fixed without tearing out the whole floor. We weave in new boards and blend the finish so the repair disappears.

      Floor Repair

    All flooring services

    CallFree Estimate