Skip to content
Kitchen island surrounded by wide-plank hardwood flooring

Hardwood Installation Services

Expert Hardwood Floor Installation in Sacramento & the Bay Area

Solid and wide-plank hardwood floor installation for homes across Sacramento and the Bay Area, nailed down over a subfloor we check and flatten first.

Types of Hardwood Installation

Hardwood Installation Options

  • Solid Hardwood

    Three-quarter-inch solid oak, hickory and maple, nailed to the subfloor. It can be sanded and refinished many times over its life.

  • Wide-Plank White Oak

    Boards five inches and wider for a calm, open look. Wide planks move more with the seasons, so acclimation and fastening matter more.

  • Prefinished vs Site-Finished

    Prefinished boards arrive sealed and go in faster with no fumes. Site-finished floors are sanded flat after install and finished in the color you pick.

  • Hardwood in Kitchens

    Wood that runs from the kitchen into the living room ties the home together. We plan around cabinets, appliances and the sink line.

Ready for floors you'll show off?

Free in-home estimate. Written quote. No pressure.

Why Floor Monkeys

What Sets Us Apart

Plain promises you can check. If it's on this list, it's how every Floor Monkeys job runs.
Living room with a white fireplace and light oak hardwood flooring
Floor Monkeys vs. typical installers
What you getFloor MonkeysTypical installers
License number shown and checkable
Crew shows up when we say
Job site cleaned every day
Moisture test before every wood install
We move your furniture and move it back
1-year workmanship warranty in writing
Owner personally checks every job
  • 16+ Years Installing Floors
  • CA License #1090151
  • 1-Year Workmanship Warranty

How We Do It

Crew member nailing hardwood boards during installation
Nailing hardwood boards
Hardwood board weave-in repair in progress
Fitting boards into an existing floor
Hardwood board repair room
Board replacement in progress

Hardwood Installation Projects

Real Floor Monkeys jobs only. Photos are added as each job wraps.
  • Kitchen island surrounded by wide-plank hardwood flooring
  • Entry with white columns and wide-plank hardwood flooring
  • Living room with arched windows and wide-plank hardwood flooring
  • Curved iron staircase above light oak hardwood flooring
  • Living room with a white fireplace and light oak hardwood flooring
  • Long hallway with warm hardwood flooring

Why Floor Monkeys

Why Homeowners Choose Floor Monkeys for Hardwood Installation

“The work beneath your floor matters just as much as the surface you see.”

Kirill, Founder
  • Your hardwood stays tight because the subfloor gets checked and fixed before any board goes down
  • We let hardwood acclimate in your home so it settles to your air, not the warehouse's
  • Hardwood rows are laid out from the main sight line, so the floor looks straight from the front door
  • Clean hardwood transitions at doorways, stairs and fireplaces, with no awkward thresholds
  • Your hardwood install comes with a written quote and a schedule you can plan around
  • The crew protects your home and cleans the hardwood job site every day

The Step You Never See

Acclimation and Moisture Testing: Why We Wait Before We Nail

Step 6 of 6

The finish protects the wood from daily wear and sets the final sheen.

Why this step matters

Wood is a natural material that takes on water from the air and gives it back. If boards go in too wet, they shrink in a dry Sacramento summer and leave gaps. If they go in too dry, they swell in a damp winter and cup at the edges. That is why the wait before install matters.

Before nailing, the boards sit in the rooms where they will live, with the heat or air running the way you normally use it. A moisture meter reads both the wood and the subfloor. The two numbers need to be close to each other and inside the range the wood maker lists. Raised-foundation homes get a look at the crawlspace too, since a wet crawlspace feeds water up into the floor from below.

Read more

Before nailing, the boards sit in the rooms where they will live, with the heat or air running the way you normally use it. A moisture meter reads both the wood and the subfloor. The two numbers need to be close to each other and inside the range the wood maker lists. Raised-foundation homes get a look at the crawlspace too, since a wet crawlspace feeds water up into the floor from below.

Only when the readings line up does the first row get nailed. It can feel slow. It is the reason a floor stays flat and tight through ten summers instead of two.

Hardwood preparation details
  1. Plywood subfloor. Screwed down tight and flat, with one seam we check.

  2. Moisture check. A check, not a layer. We test the subfloor before boards go down.

  3. Boards acclimate. The wood sits in the room first so it can adjust to the house.

  4. Underlayment paper. A thin paper layer between the subfloor and the boards.

  5. Solid oak planks. Staggered joints, nailed at an angle through the tongue.

  6. Satin finish. The finish is a sheen on the wood, not a separate layer.

Hardwood Installation Process

Our Hardwood Installation Process

Six clear steps from the first visit to the final walkthrough.
  1. Step 1

    Free in-home estimate

    We visit, measure and check your subfloor and current floors.

  2. Step 2

    Written quote

    You get the scope, materials and schedule in writing.

  3. Step 3

    Schedule and order materials

    We lock your dates and order your flooring.

  4. Step 4

    Prep and protect

    We protect your home and get the subfloor flat and ready.

  5. Step 5

    Install or refinish

    The crew installs or refinishes and cleans up every day.

  6. Step 6

    Final walkthrough

    We walk the floor with you and fix anything you spot.

Hardwood Installation Cost

What Affects Hardwood Installation Cost in Sacramento?

Every home is different under the floor, so we price each job after an in-home visit. These are the things that move the number.
  • Square footage and how many rooms the floor runs through
  • Wood species, grade and board width
  • Prefinished boards or site-finished boards
  • Subfloor repairs, leveling or squeak fixes found during prep
  • Removing and hauling the old floor
  • Stairs, landings, vents and custom borders
  • Moving furniture and appliances

Hardwood Installation Questions

FAQ

Straight answers to what homeowners ask us most.

How long does hardwood floor installation take?

Most rooms take a few days of install once the wood has acclimated. Site-finished floors add time for sanding and finish coats to cure. Your written quote lists the schedule for your home.

Can you install hardwood over concrete?

Solid hardwood is not a good match for a concrete slab. On slab homes we usually recommend engineered hardwood, which is real wood built to stay stable over concrete.

Should I pick prefinished or site-finished hardwood?

Prefinished goes in faster with no finish fumes in the house. Site-finished lets us sand the whole floor flat and match any stain color. We walk through both at your estimate.

Do I need to leave the house during install?

Most families stay home during a prefinished install. For site-finished floors, plan to stay off the floor and out of the rooms while the finish cures.

Can new hardwood match my existing floors?

Often, yes. We match species, width and direction, then sand and finish old and new together so they read as one floor. We check your current floor at the estimate.

Service Areas

Where We Offer Hardwood Floor Installation

Hardwood Floor Installation across 14 Northern California counties. Find your county and city.
Hardwood Floor Installation in Top Cities · 8 cities
Greater Sacramento · 42 cities
Bay Area · 68 cities

What Homeowners Are Saying

“I would highly recommend Floor Monkeys!”

Sanded & refinished Douglas Fir floors from 1958 & gave them new life! Fast, efficient, skilled & professional! I would highly recommend Floor Monkeys! 🐒🐒🐒

Read moreRead less

“I cannot recommend Kirill and crew from Floor Monkeys highly enough!”

⭐⭐⭐⭐⭐ I cannot recommend Kirill and crew from Floor Monkeys highly enough! From start to finish, they were professional, efficient, and truly cared about doing the job right. When the flooring supplier sold me the wrong product, the crew immediately went to pick up the correct materials without hesitation. They moved all of my furniture, leveled the subfloor, installed beautiful new flooring in both of my bedrooms, and then carefully put everything back exactly where it belonged. Their attention to detail, work ethic, and commitment to customer satisfaction were outstanding. It’s rare to find a company that is this ethical, dependable, and professional. The quality of their work exceeded my expectations, and I couldn’t be happier with the results. If you’re looking for a flooring company you can trust, I wholeheartedly recommend Four Monkeys. They earned every one of these five stars!

Read moreRead less

“I would recommend Floor Monkeys to anyone who is in need of the best in the industry...”

Kirill, owner of Floor Monkeys, went well-above anything I expected. We met several times, he tested our hardwood floor, made recommendations on how our once beautiful (and not so old) flooring could be brought back to life. The results were amazing! I was so impressed with the time, care, trust, and level of professionalism I experienced from beginning to end. I would recommend Floor Monkeys to anyone who is in need of the best in the industry...

Read moreRead less
Kitchen island surrounded by wide-plank hardwood flooring

Ready for floors you'll show off?

Free in-home estimate. Written quote. No pressure.

Hardwood Flooring Installers Who Start Under the Floor

Good hardwood flooring installers spend the first part of every job on the subfloor. A flat, dry, solid base is what keeps boards from squeaking, gapping or cupping, so we check it, fix it and only then start nailing.

On a raised foundation we look for loose plywood, soft spots near old leaks and joists that dip. Loose sheets get screwed down. Soft areas get cut out and replaced. High seams get planed and low spots get filled, so the boards sit flat from wall to wall.

Read more

On a raised foundation we look for loose plywood, soft spots near old leaks and joists that dip. Loose sheets get screwed down. Soft areas get cut out and replaced. High seams get planed and low spots get filled, so the boards sit flat from wall to wall.

We also look at how the floor meets the rest of the house: door casings, baseboards, fireplace hearths, stair noses and the kitchen cabinets. Each of those spots needs a plan before the first board goes in, or the finished floor will show it.

Solid Hardwood Floors vs Engineered Boards

Solid hardwood floors are one piece of wood all the way through, usually three-quarters of an inch thick. They can be sanded and refinished many times, which is why a well-kept solid floor can last for generations.

Solid wood moves more with the seasons than engineered boards, so it suits raised foundations and second floors, where it can be nailed to a wood subfloor. On concrete slabs, engineered hardwood is usually the smarter pick, since its layered core holds its shape over concrete.

Read more

Solid wood moves more with the seasons than engineered boards, so it suits raised foundations and second floors, where it can be nailed to a wood subfloor. On concrete slabs, engineered hardwood is usually the smarter pick, since its layered core holds its shape over concrete.

We will tell you which one fits your home after we see the subfloor. Some homes use both: solid wood upstairs on plywood and engineered wood downstairs on the slab, finished to match.

Wide Plank Hardwood Floors and White Oak Floors

Long hallway with warm hardwood flooring

Wide plank hardwood floors and white oak floors are what most Sacramento and Bay Area homeowners ask us about right now. White oak takes stain evenly, hides wear well and looks good in natural, light and dark tones.

Wider boards show more of the grain and make rooms feel larger, but each board moves more as the air changes. That makes acclimation, moisture readings and the right fastening schedule more important on a wide-plank job. Some wide planks also get glued as well as nailed.

Read more

Wider boards show more of the grain and make rooms feel larger, but each board moves more as the air changes. That makes acclimation, moisture readings and the right fastening schedule more important on a wide-plank job. Some wide planks also get glued as well as nailed.

Ask about rift and quartersawn white oak if you want a straighter grain that moves less. Live-sawn and plain-sawn boards give a more varied, rustic look. We can bring samples to your estimate so you can see them in your own light.

What Drives Hardwood Floor Installation Cost

Hardwood floor installation cost depends mostly on the wood you choose, the size of the job and what we find under the old floor. We give you a written quote after we measure and check the subfloor in person, not a number over the phone.

Species and grade set the material price. Board width matters too, since wide planks cost more per foot. Labor depends on the layout: open rooms go faster than hallways, closets, stairs and angled walls. Site finishing adds sanding and finish coats.

Read more

Species and grade set the material price. Board width matters too, since wide planks cost more per foot. Labor depends on the layout: open rooms go faster than hallways, closets, stairs and angled walls. Site finishing adds sanding and finish coats.

Prep is the cost that surprises people. Squeaks, soft spots and uneven seams take time to fix. We point them out at the estimate so they are in the quote, not added later.

Good hardwood flooring installers spend the first part of every job on the subfloor.

How to Choose a Hardwood Flooring Contractor

When you search for hardwood flooring near me, look for a licensed hardwood flooring contractor who will visit your home, check the subfloor and give you the scope in writing. Floor Monkeys holds California license #1090151, and you can check it on the state board's site.

Ask how the crew protects your home, how dust is handled, who you call during the job and what happens at the final walkthrough. A clear answer to each of those tells you more than any photo.

Read more

Ask how the crew protects your home, how dust is handled, who you call during the job and what happens at the final walkthrough. A clear answer to each of those tells you more than any photo.

Our crew shows up when we say, protects the rooms around the work and cleans up every day. At the end, we walk the floor with you and fix anything you spot before we call the job done.

Wood Floor Installation Day by Day

A typical wood floor installation runs in a set order: protect the house, remove the old floor, fix the subfloor, let the wood acclimate, lay the boards, then sand and finish if the floor is site-finished. Knowing the order helps you plan your week.

Day one is mostly protection and tear-out. We cover doorways, set up a cutting area outside when we can and pull the old flooring. Next comes the subfloor work, which is loud for a short time while loose sheets get screwed down and seams get planed flat.

Read more

Day one is mostly protection and tear-out. We cover doorways, set up a cutting area outside when we can and pull the old flooring. Next comes the subfloor work, which is loud for a short time while loose sheets get screwed down and seams get planed flat.

Install days are steady and fairly quiet: chalk lines, a starter row along the longest straight wall, then row after row with the nailer. Baseboards and trim go back last. If the floor is site-finished, the house needs to stay clear while each coat dries, and we give you the dates in writing so you can plan around them.

Caring for New Hardwood Floors

New hardwood floors last longest with felt pads under furniture, mats at outside doors, a soft broom or vacuum with no beater bar, and a cleaner made for finished wood. Skip steam mops and wet mopping, which push water into the seams.

Keep your home's humidity steady through the year if you can. Running the air in summer and avoiding very dry heat in winter keeps boards from shrinking and swelling as much. Small seasonal gaps in winter are normal for solid wood and close again in spring.

Read more

Keep your home's humidity steady through the year if you can. Running the air in summer and avoiding very dry heat in winter keeps boards from shrinking and swelling as much. Small seasonal gaps in winter are normal for solid wood and close again in spring.

When the finish starts to look dull in traffic lanes, a screen and recoat can freshen it without full sanding. Catching wear at that stage keeps the wood itself safe for many more years.

Planning Hardwood Floor Installation at Doorways

Hardwood floor installation needs a room-by-room layout that accounts for adjoining floors, doorway clearance, vents and stair openings. Checking these connections before selecting boards helps define where removal, trim adjustments and transitions belong in the written scope.

Look at how the rooms connect and where the new boards will meet existing floors. Door clearances, vents and stair openings all affect the layout. Keep a sample in the room through morning and evening light. At the visit, discuss which areas need removal and which existing boards might be saved so the written scope covers the whole wood floor installation.

Read more

Look at how the rooms connect and where the new boards will meet existing floors. Door clearances, vents and stair openings all affect the layout. Keep a sample in the room through morning and evening light. At the visit, discuss which areas need removal and which existing boards might be saved so the written scope covers the whole wood floor installation.

More Wood Services

  • Living room with light hardwood planks and a contrasting wood border

    Engineered Hardwood Installation

    Real wood on a stable core, made for the slab foundations under most newer Sacramento homes. Glued, floated or nailed, depending on what your floor needs.

    Engineered Hardwood
  • Living room with a fireplace and refinished oak flooring

    Hardwood Floor Refinishing

    We sand worn floors down to fresh wood, then stain and finish them in the color you pick. It is often the way to save original oak found under old carpet.

    Floor Refinishing
  • Spiral staircase viewed from above with oak treads and a black railing

    Stair Installation & Refinishing

    We turn carpeted stairs into wood, replace worn treads and refinish old ones. The nosing is matched to your floor so the stairs look built in.

    Stairs
  • Hardwood board weave-in repair in progress

    Hardwood Floor Repair

    Damaged boards, squeaks and gaps fixed without tearing out the whole floor. We weave in new boards and blend the finish so the repair disappears.

    Floor Repair

All flooring services

CallFree Estimate