“I would highly recommend Floor Monkeys!”
Sanded & refinished Douglas Fir floors from 1958 & gave them new life! Fast, efficient, skilled & professional! I would highly recommend Floor Monkeys! 🐒🐒🐒

Floor Repair Services
Hardwood floor repair for homes across Sacramento and the Bay Area: damaged boards replaced, squeaks quieted and gaps fixed, then blended to match.
Types of Floor Repair
Cracked, stained or broken boards cut out and replaced with matching wood, woven into the floor so the repair does not show as a patch.
Cupped, swollen or black-stained boards from leaks fixed once the source is dry, with new boards sanded and finished to match.
Loose boards and subfloor fastened back down from above or below, so the floor goes quiet without tearing it up.
Wide gaps and split boards filled or replaced, depending on the cause, so the floor looks tight again.
Damaged vinyl planks swapped for spare or matching planks, without pulling up the whole room.
Ready for floors you'll show off?
Free in-home estimate. Written quote. No pressure.
Why Floor Monkeys

| What you get | Floor Monkeys | Typical installers |
|---|---|---|
| License number shown and checkable | ||
| Crew shows up when we say | ||
| Job site cleaned every day | ||
| Moisture test before every wood install | ||
| We move your furniture and move it back | ||
| 1-year workmanship warranty in writing | ||
| Owner personally checks every job |



Floor Repair Projects










Why Floor Monkeys
“The work beneath your floor matters just as much as the surface you see.”
The Step You Never See
Step 4 of 4
The area is sanded and stain-matched until the repair disappears.
The hardest part of a floor repair is not swapping the boards. It is making the repair disappear. A new board next to a fifteen-year-old board will look different even when it is the same species, because wood darkens and changes color as it ages in the light. Finish also yellows over time.
We start by matching what we can control: species, grade, width, thickness and the direction of the grain. Then the repair boards are woven in at staggered ends, the way the original floor was laid, so there is no straight seam boxing in the repair. On site-finished floors, we sand the repair area along with the boards around it and feather the finish out so there is no edge where new meets old.
We start by matching what we can control: species, grade, width, thickness and the direction of the grain. Then the repair boards are woven in at staggered ends, the way the original floor was laid, so there is no straight seam boxing in the repair. On site-finished floors, we sand the repair area along with the boards around it and feather the finish out so there is no edge where new meets old.
Sometimes the honest answer is that a spot repair will always show a little. In that case we will tell you, and talk about refinishing the whole room.
Damaged boards. Only the bad boards need to come out.
Bad boards lift out. Damaged boards come out, down to the subfloor.
New boards woven in. New boards go in at staggered lengths, not in a straight line.
Sanded and matched. Sanded and stain-matched so the patch disappears into the floor.
Floor Repair Process
We visit, measure and check your subfloor and current floors.
You get the scope, materials and schedule in writing.
We lock your dates and order your flooring.
We protect your home and get the subfloor flat and ready.
The crew installs or refinishes and cleans up every day.
We walk the floor with you and fix anything you spot.
Floor Repair Cost
Floor Repair Questions
Yes. We cut out the damaged boards and weave in matching ones, then sand and finish the area to blend. We will tell you up front how close the match will be.
Sometimes. Lightly cupped boards can flatten once the floor dries out. Boards that are black, soft or badly swollen usually need to be replaced. The leak must be fixed first.
Most squeaks come from loose boards or subfloor rubbing on nails. We fasten them back down, from below when we can reach the crawlspace, or with hidden fasteners from above.
Yes. A damaged plank can often be removed and replaced with a spare or matching plank without pulling up the whole floor. Keeping leftover planks from your install helps a lot.
We match species, width and grain, then sand and finish to blend. On older floors a spot repair can still look slightly different. Refinishing the room makes it fully match.
Service Areas
Sanded & refinished Douglas Fir floors from 1958 & gave them new life! Fast, efficient, skilled & professional! I would highly recommend Floor Monkeys! 🐒🐒🐒
⭐⭐⭐⭐⭐ I cannot recommend Kirill and crew from Floor Monkeys highly enough! From start to finish, they were professional, efficient, and truly cared about doing the job right. When the flooring supplier sold me the wrong product, the crew immediately went to pick up the correct materials without hesitation. They moved all of my furniture, leveled the subfloor, installed beautiful new flooring in both of my bedrooms, and then carefully put everything back exactly where it belonged. Their attention to detail, work ethic, and commitment to customer satisfaction were outstanding. It’s rare to find a company that is this ethical, dependable, and professional. The quality of their work exceeded my expectations, and I couldn’t be happier with the results. If you’re looking for a flooring company you can trust, I wholeheartedly recommend Four Monkeys. They earned every one of these five stars!
Kirill, owner of Floor Monkeys, went well-above anything I expected. We met several times, he tested our hardwood floor, made recommendations on how our once beautiful (and not so old) flooring could be brought back to life. The results were amazing! I was so impressed with the time, care, trust, and level of professionalism I experienced from beginning to end. I would recommend Floor Monkeys to anyone who is in need of the best in the industry...

Ready for floors you'll show off?
Free in-home estimate. Written quote. No pressure.
Water damaged floor repair starts with the source. A leak under the sink, a dishwasher line or a wet crawlspace has to be fixed and the floor has to dry before any repair lasts. Then we replace what is too far gone and save what can be saved.
Water shows up in wood floors as cupping, where board edges rise above the middle, or crowning, where the middle rises. Dark gray or black stains mean water has soaked deep into the wood. Soft spots underfoot can mean the subfloor below is damaged too.
Water shows up in wood floors as cupping, where board edges rise above the middle, or crowning, where the middle rises. Dark gray or black stains mean water has soaked deep into the wood. Soft spots underfoot can mean the subfloor below is damaged too.
We check moisture levels in the wood and subfloor before deciding what to replace. Repairing too soon, while the floor is still wet, leads to new gaps and cupping a few months later. Waiting a little saves you paying for the repair twice.
Board replacement means cutting out the damaged boards and installing new ones in their place. Done well, the new boards are woven in at staggered lengths, sanded flush and finished to match, so you have to hunt to find them.
We cut each damaged board out without hurting the ones beside it, then trim the tongue or groove on the new board so it drops into place. It gets glued and fastened so it stays tight and quiet, just like the boards around it.
We cut each damaged board out without hurting the ones beside it, then trim the tongue or groove on the new board so it drops into place. It gets glued and fastened so it stays tight and quiet, just like the boards around it.
When we can, we take matching wood from a closet or under a cabinet and put the new board there instead. That way the repair uses wood that has aged the same as the rest of the room.

Squeaky floor repair means finding where the floor is moving and stopping it. Most squeaks come from boards rubbing against each other or against loose nails, or from subfloor that has pulled away from a joist.
In homes with a crawlspace, we can often fix squeaks from below by adding shims and screws between the joist and the subfloor. That leaves your finished floor untouched. Without access from below, we use small hidden fasteners driven from above and filled to match.
In homes with a crawlspace, we can often fix squeaks from below by adding shims and screws between the joist and the subfloor. That leaves your finished floor untouched. Without access from below, we use small hidden fasteners driven from above and filled to match.
A floor that squeaks everywhere may point to a bigger subfloor problem. In that case we will show you what we found and talk through options before doing any work.
Gap and crack repair depends on why the gap is there. Small gaps that open in winter and close in summer are normal wood movement. Wide gaps that stay open all year, or boards that have split, need a closer look and a real fix.
Permanent gaps can be filled with wood slivers glued into place and sanded flush, which looks far better than a wood putty that cracks and falls out. Split boards usually need replacement.
Permanent gaps can be filled with wood slivers glued into place and sanded flush, which looks far better than a wood putty that cracks and falls out. Split boards usually need replacement.
If gaps show up all over a newer floor, the wood may have gone in too wet or the home may be very dry. We check humidity and talk about how to keep the floor steady going forward.
A leak under the sink, a dishwasher line or a wet crawlspace has to be fixed and the floor has to dry before any repair lasts.
Vinyl plank repair is often simpler than wood. A scratched, gouged or water-stained LVP plank can usually be taken out and replaced with a new one, without pulling up the whole room, as long as a matching plank is available.
Click-lock LVP can be unlocked from the nearest wall, or a damaged plank in the middle can be cut out and a new one glued in. Glue-down LVP is lifted with heat and replaced plank by plank.
Click-lock LVP can be unlocked from the nearest wall, or a damaged plank in the middle can be cut out and a new one glued in. Glue-down LVP is lifted with heat and replaced plank by plank.
Keep a box of leftover planks after any install. Colors and styles change often, and a spare from the same batch gives a closer match than a different product.
A floor patch and blend is the finish work that makes a repair disappear. After new boards go in, the area is sanded flat, stained if needed and finished so the sheen and color match the floor around it.
Matching sheen matters as much as matching color. A satin floor with a gloss patch will catch the light and show the repair from across the room. We match the finish type and sheen to what is already on your floor.
Matching sheen matters as much as matching color. A satin floor with a gloss patch will catch the light and show the repair from across the room. We match the finish type and sheen to what is already on your floor.
For a closer match, many owners choose to screen and recoat or fully refinish the whole room after a repair. We will give you both options so you can decide.
Repair is not the right answer when the damage covers most of the room, the wood is too thin to sand again or the floor is failing because of how it was installed. In those cases a new floor costs less over time than repeated fixes.
We will always tell you which way we would go if it were our own home. Sometimes that is a small repair. Sometimes it is a refinish. Now and then it is a new floor, and we will explain why.
We will always tell you which way we would go if it were our own home. Sometimes that is a small repair. Sometimes it is a refinish. Now and then it is a new floor, and we will explain why.
Signs that point toward a new floor include boards that move under your feet across a whole room, widespread cupping from a long-term moisture problem, laminate or vinyl that has come apart at many joints, and wood that has been sanded so many times the nails show. We look for each of these at your estimate.
If you are selling soon, a smart repair and a fresh coat can be the right call even on an older floor. If you plan to stay for years, putting the money toward a new floor may serve you better. Either way, you get the facts and the choice is yours.
Planning a hardwood floor repair starts with identifying the damaged area, the cause and the available matching material. A board replacement and a wider finish blend are different scopes, so expectations should be discussed beside the existing floor before work starts.
For a floor patch and blend, save any spare boards and tell us when the damage first appeared. Photos taken before a leak was repaired can help explain the affected area, but the floor still needs an in-person check. Discuss whether the repair stops at individual boards or includes the surrounding finish. That distinction keeps the scope clear and helps set realistic expectations about the repaired wood beside older boards.
For a floor patch and blend, save any spare boards and tell us when the damage first appeared. Photos taken before a leak was repaired can help explain the affected area, but the floor still needs an in-person check. Discuss whether the repair stops at individual boards or includes the surrounding finish. That distinction keeps the scope clear and helps set realistic expectations about the repaired wood beside older boards.
More Wood Services

Solid oak, white oak and wide-plank floors installed over a checked, flat subfloor. We acclimate the wood first so it stays tight through Valley summers.
Hardwood Installation
Real wood on a stable core, made for the slab foundations under most newer Sacramento homes. Glued, floated or nailed, depending on what your floor needs.
Engineered Hardwood
We sand worn floors down to fresh wood, then stain and finish them in the color you pick. It is often the way to save original oak found under old carpet.
Floor Refinishing
We turn carpeted stairs into wood, replace worn treads and refinish old ones. The nosing is matched to your floor so the stairs look built in.
Stairs