“I would highly recommend Floor Monkeys!”
Sanded & refinished Douglas Fir floors from 1958 & gave them new life! Fast, efficient, skilled & professional! I would highly recommend Floor Monkeys! 🐒🐒🐒

Roseville Flooring
Real wood for whole-home upgrades in Roseville, with slab checks before plank choices.
Half of Roseville's homes were built before 1998. Many still have their original floors and are due for an update.
Source: U.S. Census Bureau, American Community Survey 5-year estimates, 2024. Updated November 2026.
Your Project
Roseville’s slab homes need a wood floor plan that starts beneath the boards. Our crew checks concrete, room levels and door clearances before you choose. A whole-home upgrade should feel joined up from the front hall to the kitchen.
Solid wood needs a suitable base and a sound fastening plan. We check the floor build before recommending a solid plank over concrete.
Broad white oak boards bring a quiet grain to open living areas. The crew checks moisture and layout before setting these wider boards.
Factory finish moves coating work out of your home. A site finish lets us shape the final sheen across the installed surface.
Wood can link a kitchen with the main living room. Spills need prompt care, and our plan includes appliance heights and floor edges.
Floor Monkeys Projects






Why Floor Monkeys

| What you get | Floor Monkeys | Typical installers |
|---|---|---|
| License number shown and checkable | ||
| Crew shows up when we say | ||
| Job site cleaned every day | ||
| Moisture test before every wood install | ||
| We move your furniture and move it back | ||
| 1-year workmanship warranty in writing | ||
| Owner personally checks every job |
Your Flooring Project
Our visit checks slab conditions, room levels and your preferred wood look. Samples help you judge grain beside the trim already in place.
The hardwood quote separates the board choice from base work and finishing. You can see how each room contributes to the scope.
Material ordering follows the selected wood system and any approval needs. Delivery timing allows for checks before the first board is fitted.
Dust protection and removal come before slab repair and base preparation. We check readiness at each stage before opening the next room.
Boards follow measured lines through the connected living spaces and halls. Our fitting includes the clearances required by the selected wood system.
The finished floor review covers trim, surface care and guidance on using each room again. You can raise concerns while the crew reviews each room with you.
Sanded & refinished Douglas Fir floors from 1958 & gave them new life! Fast, efficient, skilled & professional! I would highly recommend Floor Monkeys! 🐒🐒🐒
⭐⭐⭐⭐⭐ I cannot recommend Kirill and crew from Floor Monkeys highly enough! From start to finish, they were professional, efficient, and truly cared about doing the job right. When the flooring supplier sold me the wrong product, the crew immediately went to pick up the correct materials without hesitation. They moved all of my furniture, leveled the subfloor, installed beautiful new flooring in both of my bedrooms, and then carefully put everything back exactly where it belonged. Their attention to detail, work ethic, and commitment to customer satisfaction were outstanding. It’s rare to find a company that is this ethical, dependable, and professional. The quality of their work exceeded my expectations, and I couldn’t be happier with the results. If you’re looking for a flooring company you can trust, I wholeheartedly recommend Four Monkeys. They earned every one of these five stars!
Kirill, owner of Floor Monkeys, went well-above anything I expected. We met several times, he tested our hardwood floor, made recommendations on how our once beautiful (and not so old) flooring could be brought back to life. The results were amazing! I was so impressed with the time, care, trust, and level of professionalism I experienced from beginning to end. I would recommend Floor Monkeys to anyone who is in need of the best in the industry...

Ready for floors you'll show off?
Free in-home estimate. Written quote. No pressure.
Roseville hardwood projects often begin with concrete under an old floor covering. We select a wood system that suits that base and the rooms above it. Our whole-home plans account for floor heights and flow between rooms.
Many Roseville homes were built around 1998 or earlier. A house from that broad era may have several floor types indoors. Carpet might meet kitchen flooring at a short hall or family room. We measure those seams when the new wood will span both spaces together.
Many Roseville homes were built around 1998 or earlier. A house from that broad era may have several floor types indoors. Carpet might meet kitchen flooring at a short hall or family room. We measure those seams when the new wood will span both spaces together.
During our visit, each doorway gets checked for changes in floor height. A slab can sit lower beneath one old covering than beneath another. Removing the surface reveals what the next floor will actually rest on. We use those findings and your preferred grain pattern to guide wood choices.
Large rooms make board direction an early choice, rather than a finishing detail. Daylight can draw the eye along the grain toward a patio door. A long hall may pull that view in a different direction. We sketch the options so you can judge the whole floor together.
Daily use belongs in that same talk about the finished wood surface. We look for chair wear near tables and grit by outside doors. A finish helps protect the wood, but care still shapes its life. Felt pads and entry mats reduce wear where the floor works hardest.
Wood and concrete hold moisture in different ways, so both need checking. The readings help decide which floor system suits a Roseville slab home. Waiting for suitable conditions protects the fit of the new boards.
A dry-looking slab can still release moisture into the space above it. Our checks follow the needs of the chosen wood and bonding system. Room heat and indoor air also affect how the planks take up moisture. We compare both readings to guide the next step in the project.
A dry-looking slab can still release moisture into the space above it. Our checks follow the needs of the chosen wood and bonding system. Room heat and indoor air also affect how the planks take up moisture. We compare both readings to guide the next step in the project.
Solid boards usually need a suitable wood base for their fastening method. Concrete alone gives nails a very different surface from a wood base. We allow for the height an added base brings to each doorway. Those changes need space under doors and beside nearby rooms and fixtures.
Engineered wood may offer another path when its maker allows slab use. Each product has limits for moisture, bond and the surface beneath it. We match those parts as a system before placing the material order. A board label alone tells only part of that full installation story.
Flatness matters along with moisture because uneven support can stress the boards. High ridges may need grinding, while low areas may need approved patch. Our crew checks the base again once the prep work has cured. Planks then go over a surface ready for the chosen fitting method.

Tap a number to see each part.

Roseville slab homes need hardwood selected for both looks and floor structure. White oak, solid wood and engineered boards offer different routes to that goal. The right choice fits your base, room use and care habits.
White oak has a grain that can feel calm in broad rooms. Wider boards show more of each piece and create fewer visible seams. Natural grain still varies from one board to the next in a bundle. Our layout spreads that variation so one patch feels balanced with another.
White oak has a grain that can feel calm in broad rooms. Wider boards show more of each piece and create fewer visible seams. Natural grain still varies from one board to the next in a bundle. Our layout spreads that variation so one patch feels balanced with another.
Solid wood offers thickness that may support future sanding when conditions allow. We check the board profile and remaining wood before discussing future sanding. A suitable base must come first in a house built over concrete. The extra floor build can affect both cost and final surface height.
Engineered boards have a real wood face over layers that help stability. The face thickness matters if future refinishing is part of your plan. Some products allow much less sanding than a solid board can take. Product details give us a clearer answer than the broad wood category.
Factory-finished boards arrive with their coating already applied at the factory. Site-finished wood gets its stain and protective coats after the boards go down. That route brings drying time and room access into the work plan. We show samples in your own light to help settle color and sheen.
For Roseville slab rooms, we tend to recommend layered hardwood in a moderate width with a matte factory finish. The real wood face gives warmth, and the core suits a sound slab with the right bond system. We still test and flatten the base before fitting; board choice follows that work.
Roseville hardwood projects often begin with concrete under an old floor covering.
Hardwood installation cost in Roseville depends on the wood, base and layout. Removal, moisture control and trim can shift the scope before fitting begins. A site visit separates those needs from the visible plank choice.
A larger floor uses more wood, but shape also drives the work. Short halls and small closets need many cuts around their edges. A broad room may have fewer cuts across the same floor area. We account for pattern, board width and direction when estimating material needs.
A larger floor uses more wood, but shape also drives the work. Short halls and small closets need many cuts around their edges. A broad room may have fewer cuts across the same floor area. We account for pattern, board width and direction when estimating material needs.
An existing slab may need patching, grinding or a product-approved moisture treatment. A solid wood choice may also call for a raised wood base. Each route brings different materials and labor to the same room plan. Our quote explains the chosen route and what the prep work covers.
Old flooring removal varies with the way the previous surface was fixed. Carpet comes up differently from a floor bonded across the whole slab. Debris handling and the state of the uncovered concrete also affect labor. We explain any scope changes if hidden damage appears beneath the old covering.
Trim deserves its own place beside the wood and prep line items. Baseboards, floor transitions and door adjustments shape how complete the project feels. Appliance clearance can add detail in a kitchen joined to new wood. Our itemized quote helps you compare choices that cover the same tasks.
For new wood in Roseville, our written quote names the base work, board choice, and trim details, where the tested slab meets new wood and trim. Our daily cleanup follows the slab room thresholds and open kitchen edges, keeping grit away from the next stage of work.
Hardwood installation in a Roseville home follows readiness checks, prep and fitting. Wood delivery and moisture conditions influence when the boards can go down. A site-applied finish adds coating and drying stages after the floor is fitted.
The first visit gives us a view of the likely work sequence. The final schedule depends on material supply and the conditions found indoors. Wood may need time in the right room climate before fitting begins. That wait follows product guidance and readings, rather than a fixed guess.
The first visit gives us a view of the likely work sequence. The final schedule depends on material supply and the conditions found indoors. Wood may need time in the right room climate before fitting begins. That wait follows product guidance and readings, rather than a fixed guess.
Removal comes before the full slab can be checked for hidden issues. Patch compounds and moisture products may each need their own curing period. A raised base adds another stage if the selected system requires one. We start the next stage once the surface meets the product requirements.
Fitting moves from the reference line through the rooms in planned order. Cuts at doors and floor edges take care even after broad areas fill. Our crew then completes the trim and checks transitions through the home. The result should feel connected at each point where two floor types meet.
Factory finish and site finish have different effects on room access afterward. We explain the cure time and care needed for a fresh site coating. Furniture, rugs and routine cleaning may each have separate guidance to follow. Your care sheet explains those stages for the actual coating on your wood.
For Roseville homes with an HOA, we give you a written scope and product sheets for review, where the tested slab meets new wood and trim.
The scope shows the rooms, floor build, and planned work, where the tested slab meets new wood and trim. Scheduling follows approval for your address. Gate access and delivery are part of our plan for long boards and fitting tools, where the tested slab meets new wood and trim. A clear unloading spot keeps the path through the house useful, where the tested slab meets new wood and trim. We agree on the carrying route and staging space before supplies arrive, where the tested slab meets new wood and trim. The work schedule then fits the approved access hours and the floor’s drying needs, where the tested slab meets new wood and trim.
The scope shows the rooms, floor build, and planned work, where the tested slab meets new wood and trim. Scheduling follows approval for your address. Gate access and delivery are part of our plan for long boards and fitting tools, where the tested slab meets new wood and trim. A clear unloading spot keeps the path through the house useful, where the tested slab meets new wood and trim. We agree on the carrying route and staging space before supplies arrive, where the tested slab meets new wood and trim. The work schedule then fits the approved access hours and the floor’s drying needs, where the tested slab meets new wood and trim.
Most Roseville homes sit on slab, so moisture and flatness guide new wood work. Visits in Westpark and Fiddyment Farm include door heights and the edges where wood meets other floors.
For Roseville's many slab homes, we compare engineered wood before adding a raised base. A lower floor build can help at doors and appliance bays. Our crew measures those clearances and nearby floor heights before choosing the wood and fixing method. The visit gives us facts about the base, floor heights and past work. Whole-home plans need special care where an old floor meets retained surfaces. A bedroom may keep its carpet while the hall gains new wood. A kitchen may join a family room with a single grain direction. Those edges should look intentional while giving each material the space it needs. Long-term care also deserves time during the visit to your Roseville home. A busy entry benefits from a mat that catches grit from outside. Chair pads reduce rubbing where a dining set moves across the boards. Our crew explains care for your chosen finish at the final room review. You can start with a single main living area or a broader upgrade. The estimate ties the visible choices to the hidden work beneath them. Seeing those parts together makes the next decision much clearer for everyone. Your written plan becomes the shared guide from delivery through the last trim.
For Roseville's many slab homes, we compare engineered wood before adding a raised base. A lower floor build can help at doors and appliance bays. Our crew measures those clearances and nearby floor heights before choosing the wood and fixing method. The visit gives us facts about the base, floor heights and past work. Whole-home plans need special care where an old floor meets retained surfaces. A bedroom may keep its carpet while the hall gains new wood. A kitchen may join a family room with a single grain direction. Those edges should look intentional while giving each material the space it needs. Long-term care also deserves time during the visit to your Roseville home. A busy entry benefits from a mat that catches grit from outside. Chair pads reduce rubbing where a dining set moves across the boards. Our crew explains care for your chosen finish at the final room review. You can start with a single main living area or a broader upgrade. The estimate ties the visible choices to the hidden work beneath them. Seeing those parts together makes the next decision much clearer for everyone. Your written plan becomes the shared guide from delivery through the last trim.
Roseville Project Questions
Yes, with a suitable system based on slab readings and product guidance. We assess bonded options and any need for a separate wood base.
Solid wood needs a base suited to its fastening method and moisture limits. Floor height and doorway clearances help determine whether that route fits.
Wood can link the kitchen with the main room when the details fit. Prompt spill care and suitable appliance clearances remain important parts of that choice.
The current association guidance should establish any approval or paperwork needs. Our proposed material details can help you describe the scope for that review.
Related Flooring